- 1) How to Fix “Please insert a disk into USB Drive”
- 2) Why does it happen?
- 3) Method 1
- 4) Method 2
- 5) Method 3
- 6) Method 4
- 7) Method 5
- 8) Method 6
- 9) Method 7
How to Fix “Please insert a disk into USB Drive”
USB or flash drives are one of the most preferred storage devices since they are sufficient enough to suit a lot of various devices and data formats. Relying on the size of the USB drive, you can utilize it to keep all manner of files including documents, audio, images, and videos. However as helpful as a USB flash drive can be, the devices are prone to numerous errors.
One of the most usual USB errors is the message, “Please insert a disk into Removeable Disk”. In this article, we offer you a few ways to repair this issue and also get the drive functioning normally again.
Why does it happen?
When you receive the notification “Please insert a disk into Removeable Disk(drive letter)” while trying to open the device, it’s most likely because:
- Your removable drive is not well connected.
- Your USB drive is not recognized by the computer system.
- USB drive attempts to get drive letters currently designated to other partition.
- USB drive damaged by virus or other factors.
- Your device or drive is inaccessible.
- These situations may arise from hardware concerns or physical damage to the USB drive.
Use various USB ports on your PC
The problem could be a result of a malfunctioning USB port. Try to connect your drive with an alternate port on your computer. If your system doesn’t have an additional port, try to access your USB on a different computer.
Try heating up or cooling down the drive manually
Heating or cooling the USB is a lifesaving hack that you might want to attempt. This is not a sure-shot option however it functions sometimes.
Plug in the USB to the computer. By using a hair dryer, warm the USB. Wait a minute. Eliminate the USB and connect it in and out a couple of times. If it still does not function, try the same point with compressed air to cool it. If it begins functioning, promptly copy the data before it may stop working once again.
Update USB Device Driver
If the USB device driver is outdated or corrupt, it might make the USB drive not recognized by your computer. You can follow these steps below to update the device driver for the USB.
- Press Windows + X, select Device Manager, or type Device Manager in the search bar on Windows 10 to open Device Manager.
- Expand the disk drive category, as well as right-click your USB device to select Update Driver.
Assign a New Drive Letter to the USB Drive
If the drive letter of your USB drive contravened the drive letter of one of the partitions on your computer system, you might get the error timely claiming “Please insert a disk into a removable disk.” If you make sure there is such a problem, follow the actions below to manually allocate a new drive letter to your USB drive.
Step 1: Log in as an Administrator account in your system or any other account with administrative privileges.
Step 2: Press “Windows + X” and click “Disk Management”.
Step 3:Right-click on your removable drive partition as well as select “Change Drive Letter and Paths” under Disk Management.
Step 4: Change the drive letter to any kind of drive letter which has not been assigned in windows.
Format USB Drive
- Insert the USB drive into the computer system and right-click My Computer or This PC and select Manage.
- Or press Windows + X on your keyboard.
- Go to Disk Management.
- Right-click on your USB drive and click Format.
- Enter the new name of the USB drive in the Volume Label and utilize the appropriate file system. Click OK once done.
Try Hardware and Devices Troubleshooter
Running the hardware and Device troubleshooter in Windows might also fix a malfunctioning USB drive. Below is given how to run the troubleshooter;
Step 1: On your Windows PC, open the “Control panel” and after that click “Configure a Device” under “Hardware and Sound.” Windows 10 users can likewise access the same procedure by going to Settings > Update and Security > Troubleshoot and then clicking “Hardware and Devices”
Step 2: The troubleshooter needs to begin running promptly. When it is done, you need to see a report of the troubles located as well as the actions you can take to repair them. The troubleshooter might additionally fix several of the problems instantly.
Reformat the USB to FAT32 or NTFS
If the disk has troubles or becomes RAW, then you may not access the disk and meet the “Please insert a disk into Removeable Disk” error. You can reformat the USB to NTFS or FAT32 after recouping information from the USB as well as check if the USB disk can function normally again after formatting.
- Right-click “This PC/My Computer > Manage > Disk Management”.
- Or simply press Windows + X on the keyboard and go to disk management.
- Right-click on the hard drive, USB/SD card, and select Format Volume.
- Reset File System (NTFS/FAT32) and also rename the device or drive.
- Click Complete to complete repairing devices with the ‘please insert a disk into removable disk error.