How to Find IP Addresses Using CMD?

How to Find IP Addresses Using CMD?

The IP address is a unique 32-bit identifier provided to a computer for use on the network. Communication without the IP address is not possible. Nowadays, IP address management is a key security concern for network admins.

With the variety of networked devices increasing, network managers have to understand how to scan their network for tools, track IP addresses, as well as perform IP address management.

Finding IP Addresses

One of the most basic methods to find all the IP addresses on a network is a manual network scan. This approach is best for those aiming to do a quick, one-time device check or for those heading smaller organizations with a much more manageable tool checklist.

To rapidly scan a network yourself utilizing indigenous operative system (OS) abilities, comply with these steps.

  1. Basic and Simple IP Scanning
Further Reading:  How to Download Videos from Instagram

Operating systems such as Windows and Linux featured their very own native basic networking collection of tools. Commands such as “ipconfig”, “Arp -a”, or “ping” permit easy scanning as well as troubleshooting.

  • ipconfig

This command displays all network setups appointed to one or all adapters in the computer. You can search and find details such as your own IP, subnet, and also Gateway.

  • Arp -a

ARP represents “Address Resolution Protocol,” and the “- a” appendage of the command prompts the device to note all the IP addresses found within the ARP cache for the associated network. Simply put, the “Arp -a” command displays all active IP addresses linked to the regional network.

  • Ping

It assists identify connection between two hosts as well as locate the IP address of a hostname.

Find your IP Address Utilizing the Command Prompt

  1. Open Up the Command Prompt.


  1. Click the Start menu, type command prompt right into the search bar, and click the Command Prompt icon.
  2. Type ipconfig/all and hit Enter on your keyboard.


  1. The IP Address will show in addition to various other LAN details.
Further Reading:  How to Take Good Care of Your Headphone (or Earphones)

How to Analyze Results using ipconfig

ipconfig Command

The ipconfig command will return a set of results for each of the network adapters that you have set up on your computer. Those adapters that are not active will show the result, you can ignore which are Media disconnected.

You need to look for adapter results that show IPv4 Address and Default Gateway entries. On your network, now you have the addresses of two devices. The IPv4 address is the one network address of the computer that you are using, as well as the default gateway result is the IP address of your router.


ARP Network Scanning

The ARP network scanning results will offer you a listing of every one of the assigned addresses on your network. If you see a number of batches of results, look for the one that has the IP address that was reported as your computer’s IP address in the ipconfig results.


The checklist of IP addresses that you see listed reveals every one of the other addresses that have been allotted on your network. So, the complete checklist is all of these addresses consisting of the address of your computer.

Further Reading:  How to Fix BSOD?

ARP likewise shows four addresses that are labeled dynamic and six addresses that are categorized as static. The static addresses are for the usage of administration by your router. The first address in the list is the address of your router.